Smeg SI3950B Wartungshandbuch PDF herunterladen (Seite 11)

Instructions for the user

5.4 Switching on the cooking zone

After having switched on the hob the displays will show the value 0 (zero). Using keys and the

cooking power of each hot plate can be selected ranging from 1 to 9 or P.

Once the hob has been turned on, if you press key you can set the maximum power P.

5.5 Switching off the cooking zone

To deactivate a cooking zone return the power value to 0 (zero) using keys and .

To switch off all cooking zones at the same time, hold down the On/Off key for at least 2 seconds.

5.6 Residual heat

If the cooking zone is still hot after being switched off, the symbol will appear on the display. The

symbol clears once the temperature drops below 60°C.

Supervise children carefully as they cannot readily see the residual heat indicator. The cooking zones

remain hot for a certain period of time even after they have been turned off. Make sure that children

never touch the hob.

5.7 Automatic temperature control

This function can be used to keep the cooking temperature constant. Once the required level has been

reached press simultaneously keys and of the relevant cooking zone. The electronic circuit

board will keep the cooking temperature constant in time. The display of the zone where this function

has been set will show symbol .

To disable automatic temperature control, press simultaneously keys and for at least 3

seconds.

You cannot set automatic temperature control simultaneously for zones belonging to the same group,

see “5.10 Power management”.

Moreover, if automatic temperature control has been enabled for a group of hot plates, priority is given to

the zone where this function has been actually selected. The attempt of setting a higher power level for

the second cooking zone (of the same group) will be displayed by the symbol flashing.

You cannot enable automatic temperature control for more than two different zones on the 5 cooking

zone model. If you attempt to enable automatic temperature control on the third zone error E2 will be

displayed.

5.8 Cooking zone automatic shutdown timer

After activating the cooking zone and having selected the required power level you can program the

automatic shutdown at the end of a period of time (from 1 to 99 minutes).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Keine Kommentare

Smeg SI3950B Wartungshandbuch Seite 11