Smeg SEU304EMTB Bedienungsanleitung PDF herunterladen (Seite 20)

Cleaning and Maintenance

22

Changes in color do not affect the function

and stability of the glass. It is, in fact, not a

question of changes to the cooktop

material, but simply of residues which were

not removed and therefore charred.

Shiny spots can form due to the bases of

pans rubbing on the surface, especially if

they are aluminum, and the use of

unsuitable cleaning agents. They are

difficult to remove using common cleaning

products. You may need to repeat the

cleaning process several times. Using

aggressive detergents or sliding the base of

pans on the surface can, over time, wear

away the decorations of the cooktop and

could cause spots to form.

3.5 What to do if...

The cooktop does not work:

• Check that the cooktop is plugged in

and the main switch is turned on.

• Check that there are no power outages.

• Check that the fuse has not been tripped.

If it has, replace the fuse.

• Check that the thermal-magnetic circuit

breaker of the appliance has not been

tripped. If it has, reset the switch.

• Check that the sensor keys are not

locked by the control lock.

• Check that the keys are not partially

covered by a damp cloth, fluid or a

metallic object.

The results of cooking are unsatisfactory:

• Check if the cooking temperature is too

high or too low.

The cooktop smokes:

• Allow the cooktop to cool and clean it

after cooking.

• Check that the food has not spilled and

use a larger container if necessary.

The display shows the message “E2”:

• Check that no food has accidentally

fallen on the sensor keys.

• Remove any cookware or other items

that are partially on the sensor keys.

The display shows the message “E - E4”:

• There is a technical defect. Contact

Customer Service.

The fuses or the thermal-magnetic circuit

breaker of the appliance are triggered

repeatedly:

• Contact Customer Service or an

electrician.

There are fissures and cracks on the

cooktop:

• Switch off the appliance, immediately

disconnect the power supply and call

Customer Service.

1 2 ... 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare