Smeg STU8642 Bedienerhandbuch PDF herunterladen (Seite 31)

5.3.3 Completion of installation

Finish the cut with a ﬁ le (see ﬁ g. 5-25) in order to remove any burrs and/or

imperfections. Put back the base plate (see ﬁ g. 5-26) and try to open the dish-

washer door fully; if the base plate still obstructs the door, repeat the above

operations.

Fig. 5-24

Fig. 5-25

Fig. 5-26

Before securing the dishwasher to the adjacent units, attach the gaskets to

the sides.

Remove the adhesive band on the gasket (see ﬁ g. 5-27).

Fix the gasket to the dishwasher, inserting it in the seat on the sides towards

the front (see ﬁ g. 5-28), and making sure that the long side of the gasket, the

one with the hole for inserting the screw, is attached to the outside of the dish-

washer; the hole in the long side must match the hole in the dishwasher (see

ref. A ﬁ g. 5-29). Make sure the gasket adheres perfectly to the dishwasher.

Fig. 5-27

Fig. 5-28

INSTALLATION INSTRUCTION

1 2 ... 26 27 28 29 30 31 32 33 34

Keine Kommentare

Smeg STU8642 Bedienerhandbuch Seite 31