Smeg SFP485N Bedienungsanleitung Seite 1

Contents31EN1 Instructions 321.1 General safety instructions 321.2 Manufacturer liability 331.3 Appliance purpose 331.4 Disposal 331.5 Identific

Use40Functions listEcoUsing the grill and the lower heating element in combination is particularly suitable for cooking on a single shelf, as it provi

Use41EN3.5 Cooking adviceGeneral advice• Use a fan-assisted function to achieve uniform cooking at several levels.• It is not possible to shorten co

Use42Advice for defrosting and proving• Place frozen foods without their packaging in a lidless container on the first shelf of the oven.• Avoid ove

Use43ENSetting the timeOn the first use, or after a power failure, will be flashing on the appliance's display. To be able to start any cooking

Use44Timed cooking1. After selecting a cooking function and temperature, press the temperature knob twice. The display shows and the indicator lig

Use45ENProgrammed cooking1. After selecting a cooking function and temperature, press the temperature knob twice. The display shows and the indica

Use46Modifying the data set during programmed cookingDuring operation, it is possible to modify programmed cooking duration:1. When the and indica

Use47ENWith the appliance in Stand-By status 1. Press and hold the temperature knob down for at least 5 seconds.2. Turn the temperature knob right or

Use48Cooking information tableFood Weight (Kg) FunctionRunner position from the bottomTemperature(°C)Time (minutes)Lasagne3 - 4 Static 1 220 - 230 45

Cleaning and maintenance49EN4 Cleaning and maintenance4.1 Instructions4.2 Cleaning the surfacesTo keep the surfaces in good condition, they should be

Instructions321 Instructions1.1 General safety instructionsRisk of personal injury• During use the appliance and its accessible parts become very hot

Cleaning and maintenance503. To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting

Cleaning and maintenance51EN4. Clean the external glass panel and the panels previously removed. Use absorbent kitchen roll. In case of stubborn dirt,

Cleaning and maintenance52Removing racks/trays support framesRemoving the guide frames enables the sides to be cleaned more easily. This operation sho

Cleaning and maintenance53ENPyrolysis setting1. Turn the function knob to symbol or .2. Press the temperature knob to start the pyrolysis cycle. The

Cleaning and maintenance54Setting of programmed pyrolysisIt is possible to program the pyrolysis start time.9. After selecting the pyrolysis cycle dur

Cleaning and maintenance55EN5. Replace the lamp with one of the same type (40W).6. Refit the cover correctly, so that the moulded part of the glass is

Installation565 Installation5.1 Electrical connectionGeneral informationCheck the grid characteristics against the data indicated on the plate.The ide

Installation57EN5.3 PositioningFastening bushingsRemove the bushing covers inserted on the oven front. Mount the appliance into the recess.Secure the

Installation58Mounting under worktops (mm) Mounting into a column (mm)Make sure that the piece of furniture rear/bottom part has an opening of approx.

Instructions33ENFor this appliance• Ensure that the appliance is switched off before replacing the bulb.• Do not rest any weight or sit on the open

Instructions34Our appliances are packed in non-polluting and recyclable materials.• Consign the packing materials to the appropriate selective collec

Description35EN2 Description2.1 General Description1 Control panel2 Oven light3 Seal4 Door5 Fan6 Rack/tray support frames Frame shelf

Description362.2 Control panelTemperature knob (1)This knob allows you to select the cooking temperature, the cooking time and to set programmed cooki

Description37EN2.4 Available accessoriesRackUseful for supporting containers with food during cooking.Tray rackTo be placed over the top of the oven t

Use383 Use3.1 Instructions3.2 First use1. Remove any protective film from the outside or inside of the appliance, including accessories.2. Remove any

Use39EN3.3 Using the accessoriesRacks and traysRacks and trays have to be inserted into the side guides until they come to a complete stop.• The mech